1、Controlled by PLC control unit
2、Running: Air pressure transmission
3、Operation : Manual, semi-automatic, full automatic（having conveyer belt）
4、Power: It can be selected, having heated pipes 12pcs×1200W in each side
5、Able to select dry status cores or wet status cores in a multi-cavity core mold.
6、Heated by electric elements, automatic constant temperature (moveable& static mold can control temperature singly).
7、Automatic core mold cleaning for shooting sand side of die
8、mold engage stroke:300mm
9、Ejection stroke:30mm(moveable mold adopts mechanical and
static mold pulled by tank)
10、Core-pulling function: standard route:150mm& adjustable
11、Max focus distance of entering material’s hole: 320mm
12、Having two safety doors
13、Fixing floodlight inside the machine
14、Operation’s tension of air pressure: 0.5～0.7Mpa
15、Min. cycle time in theory: 30～60 seconds
16、Max weight of the core mold: 4000g
17、Heating board size: 350×220×60mm
18、Max. mold size: 400×250×110mm
19、Distance between the two heating boards: 460mm
20、Slow-start device for keeping the machine stability
21、Alarm for low working pressure
22、Machine dimension: 3600×900×2400mm
Copyright @ 2009 ORIENO PRECISION HARDWARE CO.,LTD. All Rights Reserved.